Key Features
Applicability
2-inch front-to-back design
Compact design for driving screws and drilling holes in tight, difficult work areas
Durability
All metal housing for maximum durability
The support arm provides security and a comfortable grip. It can help you save time and get the job done easier.
Nice Torque
Up to max. 3000 RPM and 443in-lbs (50 Nm) of torque.
For use with cordless drill and impact driver up to 18 volts.
Key Features
Good Flexibility
360° Collar Rotation
150° Support Arm Rotation
The support arm can be adjusted to 40 positions ( 8 positions around the head of right angle drill attachment, each has 5 side angle positions).
High Compatibility
Compatible with a wide variety of 1/4 inch HEX Shank Accessories
Drill Bits
Spade Bits
Nut Drivers
Drill Chucks
Before Use
Note:
When adjusting the position of the support arm, align the edge of right angle drill attachment head with the edge of the adjustment collar. Otherwise, the support arm will be stuck. With drills up to 3,000 RPM, the support arm can be adjusted to 40 positions ( 8 positions around the head of right angle drill attachment, each has 5 side angle positions).
Warning:
To reduce the risk of injury, the support arm must be securely tightened in the detent position. Otherwise, the adjustment collar would rotate when used.
The angle attachment is for use with cordless drills and impact drivers up to 18 volts. Never use the attachment with impacting tool or corded tool.
How to use
Make sure the adjustment collar is on the “free rotation†position.
Rotate the adjustment collar until the support arm is in the desired position (45° increments).
Unscrew the support ar
View full description
Item# : SPM9272431529
Model # : iSH09-M582367mn