Forrest NM1612011180 No-Melt 16-Inch 120-Tooth 1-Inch Arbor .18-Inch Kerf Plastic-Cutting Circular-Saw Blade - The Forrest NM1612011180 Circular Saw Blade is an all-purpose blade for table saws that leaves edges ready to use with minimal planing and sanding. The Forest NM1612011180 Blade is double hard for a longer cutting life and made for cutting wood between 1 and 2 inches thick. Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded and a cross-cut edge that is almost mark-free. The blades run very quietly and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade) superior C-4 carbide teeth are hand-brazed to the plate and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well so they should come back better than new. Forrest Woodworker 2 Saw Blade For Table Saws. With this one all purpose blade you can RIP & CROSSCUT 1" to 2" hardwood and softwood resulting in a smooth as sanded surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates. Customized Forrest Woodworker 2 For Table Saws. For the advanced table saw operator. Ideal for joinery and special uses. Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result...no planing/jointing or sanding. In many cases a glue-line cut can be obtained depending on the accuracy of the saw machine.
-
-
- Enter your model number
-
- above to make sure this fits.
-
View full description
Item# : SPM12212595330
Model # :
