Package includes: 2 set lamp harp with UNO adapter, 2 x instructions.
Please make sure your lamp bulb base is E26 with Collar Ring (such as pictures),Dedicated to E26 lamp holder converter detachable lamp Harp.
Easy to Install
Installation Instructions
Remove finial, lamp shade and light bulb.
Lift both sleeves(Figure1) at bottom of harp and squeeze harp gently inward. Lift harp away from harp bottom.
Remove socket shell from cap by pressing where noted on shell.
Remove wires from terminal screws of socket; mark wires so they can be put back onto the same screws later:
Unscrew socket cap. Loosen set screw as required.
Replace harp bottom with new one, then reverse above to complete lamp.
Notes: Ensure the lamp has been power off before installing the harp set !
If you buy 8 inch harp, Don't forget to add the tall of the bulb holder, your lamp shade should be tall than 10 inch.
If you buy 10 inch harp, Don't forget to add the tall of the bulb holder, your lamp shade should be tall than 12 inch.
Canomo Lamp Harp Holder with Light Base and Ball Lamp Finial Canomo Saddle and Faceted Crystal Ball Finial for Lamp Shades Canomo All Parts Needed and Instructions for DIY Lamp Design or Repair Canomo Saddle and Pineapple Whisker Finial for Lamp Shades Canomo Lamp Finial Cap Knob Lamp Decoration for Lamp Shade
style Canomo Lamp Harp Holder with Light Base and Ball Lamp Finial for Table and Floor Lamps Canomo Saddle and Faceted Crystal Ball Finial for Lamp Shades Canomo All Parts Needed and Instructions for DIY Lamp Design or Repair Canomo Saddle and Pineapple Whisker Finial for Lamp Shades Canomo Lamp Finial Cap Knob Lamp Decoration for Lamp Shade
View full description
Item# : SPM9276199729
Model # : B-1