Genmitsu MDF Spoilboard with Scale for 3018
Note:
Make sure the MDF spoilboard is secured well to the machine bed.
Make sure the CNC material is clamped tight to the MDF spoilboard / machine bed, or you will get vibration, chatter, poor cut finish, and can possibly break your cutting bit.
Do not use any lubricant when you use an MDF spoilboard. It will swell and expand if it gets wet. So using spray or mist coolant or oils is not recommended.
Package List
1x MDF Spoilboard
1x Hexagon Socket Wrench (3mm)
7x Screw (M5*16)
7x Slider Nut (M5)
1x Assembly Guide
Compact Hole Distribution:
Compared with the original MDF spoilboard, the hole distribution on this upgraded spoilboard is more compact. This makes it easier to fix various sizes of material and hold down clamps.
Scale Grid:
A scale grid in centimeters is pre-printed on the spoilboard which makes the fixed position of the engraving material clear and accurate.
Compatibility:
This spoilboard is greatly compatible with 3018 series router machines, including 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 and 3018-MX3.
Genmitsu CNC Upgraded MDF GRID Spoilboard Genmitsu CNC MDF Spoilboard
Dimensions: 300 x 180 x 12mm (11.81x 7.09x 0.47 inch) 300 x 180 x 12mm (11.81x 7.09x 0.47 inch)
Material: MDF (Medium-Density Fibreboard) MDF (Medium-Density Fibreboard)
Scale Grid: YES NO
Compatibility: Most 3018 series router machines on the market Most 3018 series router machines on the market
Hole Distribution:: 24 holes in total, for better clamps mounting 16 holes in total
Hole Size: M6 Holes (6mm) M6 Holes (6mm)
View full description
Item# : SPM9272356929
Model # : 259405790