An accurate stud finder has great help on DIY home Project, No matter whether you’re hanging a picture, mounting a TV or renovating part of your home.
upgraded 5 in 1 stud finder
This stud finder features 5 stud modes to meet your multi detection needs. it is perfect for normal scanning of drywalls and finding joists, beams, and studs in almost all types of stud walls, for example, finding studs on drywalls, plaster wall, finding the beams in the ceiling, floor, locating metal behind walls or other surfaces, even locating metal/screws behind tiles.
This 5 in 1 stud finder with new design adopts intelligent micro-sensor chip with highest sensitivity,which is the best choice for locating the studs/metal/AC wires.Moreover, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Stud Scan
This Stud finder has 3 modes to detect wood and metal up to 1.5inch(38 mm), please detect in Stud Mode first to minimize false positives or find other objects further behind the wall that may not a stud
Metal Stud
The metal Stud can be detected in stud scan and deep stud Scan, you need use mental scan to confirm before reading in Stud Scan or Deep Stud Scan was a wood Stud or Mental Stud
AC Wire Scan
In this mode detect live, unshielded AC wires, electrical wires up to 2 inches (51 mm) deep.
For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: Wire Warning Detection works in both StudScan / DeepScan / MetalScan Modes. The Wire Warning Detection Icon will flash when live, unshielded wires are detected.
Step 1:Calibrate the tool before every scan
Important notice:calibrate it before every scan
Please insert a 9V Battery( not included in package), press Power Button to turn on the tool. put it on the wall where you want to detect, and choose the Scan Mode, then press the Scan Button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the
View full description
Item# : SPM9280728329
Model # : TH560