Specification:
Item Type: MK-328 Transistor Tester
1. Key operation for automatic shutdown1. Darlington transistor can be identified by the threshold voltage of high current amplification factor.
2. Measure the gate threshold voltage and gate capacity for MOSFET.
3. Measure and display up to four decimal digit values in the right dimension. All symbols are surrounded by the probe number of the Tester.So potentiometer. If the potentiometer is adjusted to one of its ends, the tester cannot distinguish the middle pin from the end pin.
4. The resistance measurement with resolution is 0.1° and can measure up to 50MΩ
5. Can detect and measure a capacitor. It displays numbers with up to four decimal places in the right dimension. The value can be from 30pF to 100mF. The resolution can get 1pF.
6. For those with a capacity value higher than 2μF equivalent. The serial resistance (ESR) has a resolution of 0.01Ω and displays two significant decimal digits.
7. Up to two diodes are displayed in the correct order and diode symbol. In addition, the forward voltage is also displayed.
8. The LED is detected as a diode; the forward voltage is much higher than the normal voltage. Two-to-one LEDs are also detected as two diodes.
9. If the reverse fault voltage is lower than 4.5 V, the Zener diode can be identified
10. Measure the capacity of a single diode in the opposite direction. If the base is connected and only one collector or emitter is connected, the bipolar transistor can also be analyzed
Package List:
1 x Tester
3 x Test Pen
1 x Motherboard
View full description
Item# : SPM9168163323
Model # : iSH09-M636063mn