Generic Soda Machine CO2 Cartridges Refill Exchange Adapter Bottle Connector CO2 Tank Soda Maker Accessories with Hose for Filling Soda

Instructions for Filling Soda Machine Cylinders 1. Disconnect the black cylinder fitting (with the knurled black knob) from the hose by sliding the quick-disconnect sleeve (brass-colored, knurled) slightly. 2. Ensure that the knurled black knob is backed off all the way before threading it onto the cylinder (turn the knob counter-clockwise until it stops – don’t force it). 3. Thread the black cylinder fitting onto the cylinder by hand, making sure it’s snug. 4. Tighten the knurled knob on the cylinder fitting all the way (clockwise) until it stops – don’t force it. A small amount of CO2 may escape. If a lot escapes, the cylinder wasn’t empty. Connect the hose to the Soda Machine cylinder by sliding the quick-disconnect sleeve back, pushing it onto the black cylinder fitting and then releasing the quick-disconnect sleeve. 6. Make certain that the small silver bleed valve is closed by tightening it clockwise – don’t force it. 7. Barely open the valve on the CO2 cylinder (the hand wheel is labeled ‘Open’ and ‘Closed’ with appropriate arrows). If the hand wheel on the CO2 cylinder is opened too quickly, a safety valve on the Soda Machine cylinder will close automatically and won’t fill. You’ll have to close the hand wheel on the CO2 cylinder and then open the small, silver bleed valve to let off pressure, then begin the process again, starting at number 7. 8. You’ll be able to hear the CO2 passing from the CO2 cylinder to the Soda Machine cylinder. Very gradually, open the hand wheel on the CO2 cylinder until you no longer hear gas passing. Once all is quiet, close the hand wheel on the CO2 cylinder and turn the black, knurled knob on the Soda Machine cylinder fitting counter-clockwise until it stops. 9.

View full description