M142E38V3 Carbide Tipped Bandsaw Blade 142" Long - 3/8" Width; 3-4 Variable Tooth

Magnate M142E38V3 Carbide Tipped Bandsaw Blade 142" Long - 3/8" Width; 3-4 Variable Tooth - The picture depicted represents one blade; the pricing is for one blade/package. NOTE: The owner's manual of some woodcutting bandsaw may stipulate that it can cut metal but woodcutting bandsaws can only cut non-ferrous metals such as aluminum brass copper etc. Cutting steel could damage your saw due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.e. steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts excellent finish. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel M42 bi-metal blades when cutting wood especially tropical hardwoods i.e. ebony koa or cocabolo abrasive non-ferrous materials. It is also ideal for cutting alloy steels tool steels bearing steel carbon steels stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 142 inch ( 11 ft. 10 inch 11' 10" ) bandsaw blades suit the following models:18" RIKON 10-340 10-345 10-370; If in doubt to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications - not only the length but also the range of the width and thickness.2 - If the owner's manual is not available refer to previous invoices.3 - Cut your old bandsaw blade so that it lies flat on a level surface and measure its length. This method will provide the most possible accurate length.4 - Upon requested Magnate makes blades of any length and types to fit your brand and model.

• Enter your model number
• above to make<