B32 Gimbal Controller (AlexMos 32-bit 3-axis)

B32 Gimbal Controller (AlexMos 32-bit 3-axis) - Delivering the latest technology in 3-axis camera stabilization the BeeWorks 32-bit brushless gimbal controller is built around the powerful ARM Cortex-M4 processor. All three axes are contained on a single 50x50mm printed circuit board that can can accommodate 30V input power from up to a 7S LiPo battery. An 18x20mm 6-axis (gyro + accelerometers) inertial measurement unit (IMU) sensor board also is included. The gimbal controller is a BaseCam Electronics AlexMos design manufactured under license in Seattle by BeeWorks LLC. The BeeWorks Gimbal Controller comes with two cables: 1. IMU-to-Controller cable - 20" long with mating connectors on both ends. 2. Power cable - 6" long twisted pair with a mating connector for the controller board and stripped wire at the other end ready for the battery connector of your choice. Weight of the controller board is 16 grams. Total weight with IMU sensor and cables is 24 grams. A B32 Gimbal Controller user manual is available on Kindle and on the BeeWorks website. Please contact BeeWorks support at BeeWorksGear if you encounter difficulty with any components in the kit.

View full description