Fastener Free Deck Surface with CAMO MARKSMAN System
The MARKSMAN system makes it easy to fasten CAMO Edge hidden deck screws. Simply set the tool, drop your deck screws in each fastener slot, and drive.
Jig that allows fasteners to be installed on the edge of the board, for a fastener-free deck top
Automatic spacing based on tool chosen (see below)
Edge deck screws reduce splitting, cracking, and maintenance for a barefoot approved deck top
Suitable for pressure-treated lumber, cedar, hardwood, PVC, composite or synthetic boards
No-slip grip action holds the tool securely to the deck board while fastening
Dual screw guides fasten both sides of the deck board with single tool placement
For best results, predrill hardwood and capped composite deck boards
Driver bits are included in each pail of CAMO Edge hidden deck screws
3 Easy Steps for a Fastener-Free Deck Surface
Step 1: Set The Tool
Simply position the tool over a joist and clamp the Marksman to treated deck board. The clamp automatically creates spacing for the ideal gap (based on the tool chosen, see below).
Step 2: Drop In Screws
Load 2 CAMO Edge Deck Screws into the built-in guides. These screws feature a rake tip to auger out material and prevent splitting.
Step 3: Drive Screws
Attach the included driver bit to your drill and drive both screws. Don't worry about overdriving as the built-in shoulder will stop at the perfect depth automatically.
The Marksman System
PRO-X1
For use with Treated Lumber deck boards. Provides a 1/16" gap. Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board.
PRO
For use with Composite decking. Provides a 3/16" gap. Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board.
PRO-NB
For use with Narrow Board hardwood, composite, PVC, cedar and treated lumber deck boards. Fits any 3-1/4 in. (83mm) to 5 in. (
View full description
Item# : SPM9271546629
Model # : 345020
