Senninger 30 PSI Pressure-Master 3/4" x 3/4" FPT Regulator Medium Flow

Senninger Medium Flow Pressure-Master Regulator is ideal for installations requiring mid-range flows of 2 20 gpm (454 4543 L/hr), including solid set, drip or other low volume irrigation, as well as center pivot and other mechanical-move systems. Each regulator maintains a constant preset outlet pressure based on its flow / inlet pressure. Note that with no flow through the regulator, the inlet and outlet pressures will be the same.Features: 100% water tested for accuracy at Senninger s in-house facilities Can be installed above or below ground Large flow path resists plugging Very low hysteresis and friction loss Pressure Range: 6 to 60 psi (0.41 to 4.14 bar) Flows: 2 to 20 gpm (454 to 4543 L/hr) Backed by a two year warranty on materials, workmanship and performance Model # Preset Operating Pressure Maximum Inlet Pressure Flow Range PMR-MF-6 6 psi (0.41 bar) 100 psi (6.90 bar) 4 16 gpm (909 3634 L/hr) PMR-MF-10 10 psi (0.69 bar) 120 psi (8.28 bar) 4 16 gpm (909 3634 L/hr) PMR-MF-12 12 psi (0.83 bar) 135 psi (9.31 bar) 2 20 gpm (454 4542 L/hr) PMR-MF-15 15 psi (1.03 bar) 150 psi (10.35 bar) 2 20 gpm (454 4542 L/hr) PMR-MF-20 20 psi (1.38 bar) 150 psi (10.35 bar) 2 20 gpm (454 4542 L/hr) PMR-MF-25 25 psi (1.72 bar) 150 psi (10.35 bar) 2 20 gpm (454 4542 L/hr) PMR-MF-30 30 psi (2.07 bar) 150 psi (10.35 bar) 2 20 gpm (454 4542 L/hr) PMR-MF-35 35 psi (2.41 bar) 150 psi (10.35 bar) 2 20 gpm (454 4542 L/hr) PMR-MF-40 40 psi (2.76 bar) 150 psi (10.35 bar) 2 20 gpm (454 4542 L/hr) PMR-MF-50 50 psi (3.45 bar) 150 psi (10.35 bar) 2 20 gpm (454 4542 L/hr) PMR-MF-60 60 psi (4.14 bar) 150 psi (10.35 bar) 2 20 gpm (454 4542 L/hr) Caution: Always install pressure regulators downstream from all shut-off valves. Be sure to install pressure regulators in the proper direction. The arrow on the upper housing shows the direction of the flow and should always point downstream toward applicators.