Overall, others give this:

15 Reviews Write a review
13 Reviewers (87.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars
(0)

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise3 found this helpful
ReedCotton
Jun 11 , 2012
Craftsman 6 pc. Roll Pin Punch Set
This set of tools may not be a nessicary part of every tool box but it is reall handy to have around it you have to drift out a roll pinfrom its installation. The punches are desined with a special tip that will keep the end of the roll pin from mushrooming as it is being driven. Inadvertently expanding the pin could cause damage to the parts you are extracting the pin from. These punches are made in the U.S.A. and have the full Craftsman Hand Tool Warrantee. ***Like any other too you use by hitting it with a hammer, ALWAYS wear safetyglasses when using these tools. ***
Criticism4 found this helpful
toolguy38
Apr 11 , 2009
No pouch
The product description on 43167 punch set says "Vinyl pouch for protection and storage." Wrong. There is no pouch. It comes in a plastic package and you're left with 6 loose punches. Buyer beware.
 

ManoloMom

Montevallo, AL

Apr 15 , 2014
Overall
Good buy

Craftsman quality as always!

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

silencius

Alexandria, VA

Apr 8 , 2014
Overall
Good punches, different sizes from the standard punch set

The Craftsman 6 pc. Roll Pin Punch Set seems very satisfactory. I've only used them a little but the biggest surprise is the sizing; the selection is very different from the standard non-pin punch set. If you're shopping to solve a specific problem, just be sure this set has what you need.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

gunguy456

Suffolk, VA

Feb 19 , 2014
Overall
took forever to fins thesd

it took me three stores to find a set of roll pin punches but sears came through and had them. high quality shoul dlast me forever

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

xshovelheadx

Evergreen Park, IL

Jan 20 , 2014
Overall
Great set

This set is perfect. It works out well and they are still USA made. I can't imagine not having these in my tool box. If you do a lot with roll pins, it is nice to have this set. IT really does help get a grip on the pin before you start pounding the pin in.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

sgs236

Fairmont, WV

Dec 21 , 2013
Overall
Still USA made.

I just bought these punches and they are still made in the USA. A good quality set of punches for the money. Only down side is that they don't come with a plastic case.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

dsea2020

Kenner, LA

Nov 28 , 2013
Overall
A++++++ great product

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

mspjag

Minneapolis, MN

Sep 21 , 2013
Overall
Roll Pin Punch Set

I didn't know such a tool existed as a "roll pin punch" until I saw this set in the store. This set is GREAT especially if you need to remove several roll pins. The punche s have a little **** on the tip which self-centers on the roll pin and allows you to drive the pins out easily. I only wish I had found it sooner.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review
May 8 , 2013
Overall
Roll Pin Punch Set

Quality is very good, but the smallest punch in my set was bent or ground improperly before I bought it. I know I could drive across town to get it replaced, but that will happen later. Craftsman is very good and will stand behind their tools....


Helpful
(1)
Not Helpful
(0)
Flag this Review

joseschopshop

Leander, TX

Dec 24 , 2012
Overall
Good tools.

Nice USA made tools.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

shbenoit

Mesquite, NM

Jul 31 , 2012
Overall
Roll Pin Punch Set

Top Quality, worked great and got the job done.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

ReedCotton

Bonny Doon, CA

Jun 11 , 2012
Overall
Craftsman 6 pc. Roll Pin Punch Set

This set of tools may not be a nessicary part of every tool box but it is reall handy to have around it you have to drift out a roll pinfrom its installation. The punches are desined with a special tip that will keep the end of the roll pin from mushrooming as it is being driven. Inadvertently expanding the pin could cause damage to the parts you are extracting the pin from. These punches are made in the U.S.A. and have the full Craftsman Hand Tool Warrantee. ***Like any other too you use by hitting it with a hammer, ALWAYS wear safetyglasses when using these tools. ***

I would recommend this product to a friend.

Helpful
(3)
Not Helpful
(0)
Flag this Review

eb-msn

Madison, WI

Apr 21 , 2011
Overall
Decent set, no case.

This is a decent roll pin punch set. I ordered it to install a roll pin into the tilt mechanism in my boat outdrive and it worked perfectly - the smallest driver fit and I had the pin installed in under a minute with just a few hammer taps. The time I installed this same pin I'd used a standard punch and it'd damaged the pin, causing failure in less than a year, so I'm a firm believer in roll pin punches now.

The biggest downside is that this set was advertised as coming with a case. I expected a vinyl "roll-up" pouch with sleeve for the individual tools, but I guess they consider the plastic store packaging they sell it in to be a case. I'm rather disappointed about that, but I guess I'll just throw them in with my other punches and be careful about only using them on roll pins.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

sp-train-77

Rancho Cordova, CA

Oct 28 , 2010
via craftsman.com
Overall
You'll be surprised how often you use them...

This is one of those tools that is very simple in design and you will be surprised how often you find yourself using.

Rollpins are the curled sheetmetal pins inserted to keep parts together in many, many industrial and consumer products.  If you try to drift one out of a hole you will find that the pin becomes permanentally buggered-up with a crushed end.  Then you have the challenge of finding a replacement rollpin that is the right size.(The rolled construction provides a small amount of spring action to keep the pin in place once seated, the diameter and thickness are critical).  Just use the proper rollpin punch and the pin will pop out of the hole with nary a scratch on it and will be reusable.  Repair effected quickly, no hunting for a replacement pin.  I find these punches useful in working on my guns as well as aviation parts.

"Sacramento" Bruce Conklin


Helpful
(0)
Not Helpful
(0)
Flag this Review

jgriff486

Murfreesboro, TN

Oct 28 , 2010
via craftsman.com
Overall
Useful in so many ways

I use these primarily to work on my motorcycle wheel bearings.  They are tough and exactly the right shape and size for driving out bearings.  I have found that I use them elsewhere on my bike, and the quality seems to be excellent.  I received these as a gift, and I have been pleased with them thus far.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
Jun 9 , 2010
Overall
The 6 pc Roll Pin Punch Set was a great addition to my tool set

I added these to my Craftsman roll-away tool set in my workshop.  So far, they have worked okay.  I use them to pound on roll pins and the end of each punch has a special tip that fits inside the matching roll pin.  There is nothing like being prepared for a roll pin.  They need to correct the specifications where it says a case is included.  They only come with a package like a blister pack. 

I would recommend this product to a friend.

Helpful
(3)
Not Helpful
(0)
Flag this Review

toolguy38

, SoCal

Apr 11 , 2009
Overall
No pouch

The product description on 43167 punch set says "Vinyl pouch for protection and storage." Wrong. There is no pouch. It comes in a plastic package and you're left with 6 loose punches. Buyer beware.


Helpful
(4)
Not Helpful
(1)
Flag this Review

toolguy38

, SoCal

Apr 11 , 2009
via craftsman.com
Overall
No pouch

The product description on 43167 punch set says "Vinyl pouch for protection and storage." Wrong. There is no pouch. It comes in a plastic package and you're left with 6 loose punches. Buyer beware.


Helpful
(4)
Not Helpful
(0)
Flag this Review

 

close x