Craftsman  3/4 hp 6'' x 9'' Belt/Disc Sander (22500)

I bought this machine used once burned up. Got the run around about replace or fix it. They finely replaced and its no better. Just junk might be better as anchor for your boat.

I bought this table top model believing it would handle almost everything possible that I intend to work on as related to sanding projects. I've used it 3 times; first two, very light duty work and really didn't need this big machine. The 3rd time, I used it for light work again, applying absolutely no pressure on the motor or belts. It burned out, I suppose the capacitor or motor, or whatever. What a complete disappointment. Sears simply said that I'd have to pay for its repair at their repair department because it only carries a 2 month warranty. I suggest that you don't get this machine! Sorry Sears, I have liked almost everything else you have to offer - not this time, nor did I appreciate having to pay for a repair that I don't feel responsible for in creating. Shame on the cheap motor that Sears used for this model.

After looking at reviews and comparing prices, I purchased this Craftsman sander and I'm happy I did. It is a great value for the money.

I had this on my wish list and my wife purchased this for my birthday and I was not disappointed after opening up the box and putting it up on my workbench. 

6 x 9 Disc Sander is a Woodshop Essential

The disk sander is great for doing precise sanding and for sharpening your wood tools, shaping parts for your projects and cleaning burrs and such. .  The work table attatchment is extremely stable and sturdy and it is adjustable from 90 to 45 degrees. the work table has a miter slot and a miter guage to work with. This work table easily is attatched to either the sanding disk station or the belt sanding station.. This sander weighs approx 88 pounds and needs a solid work surface to operate off of. Eventhough, this unit has rubber feet to limit vibration and to keep from sliding around, I would recommend to secure the sander to your work surface by bolting it down.This sander sports a hefty 3/4HP motor and has plenty of power for just about any of your shop sanding needs. 

Changing the belts and disks is very easy and quick to do. The belt tracking is simple to use and requires no tools. the belt station can be operated horizontally or vertically and at various stops in between. I also recommend using a cleaning stick to help keep your disks and belts clean and lasting longer. There is a dust port to attatch your shop vac to to help limit dust around your work area. 

I have only had this bench top sander for a short time, but I have used it quite a bit already and was able to shape several parts for my current project and to clean up some other items that I have been working on. This saved me a lot of time from how I had to do this same work before. I plan on making me a work station soley for my new bench sander with rollers to be able to move around the shop as needed. 

My only complaints that I have found so far is that if you mount the sander, attatching the miter table to the back of the belt oprtion of the sander is a little hard to reach and if you need to use the end of the belt for contour sanding, you will need access to 3 different sides of your sander. Most work benches, this might be a problem to be able to access 3-sides of your sander with a adequate work area. so mounting to your work bench may limit your access to parts of the sander. I think building my mobile work station will solve this issue for me in my shop. This is my only negative for this sander.

I will update my review as I put more hours on the unit, but for the moment, I give my birthday gift  high marks and would have no issues recommending this unit to my friends or anyone in the market for a hefty bench top sander.

I really haven't used it alot but when I have that bad boy has some power. The UPS man wasn't too happy about taking it out of the truck and lugging it up to the door. I wasn't home and this thing is heavy

As a long standing Sears customer, My shop consists almost entirely of Chraftsman tools. I always look for what I need at sears first. I anticipate many enjoyable hours with this new sander. It replaces an older Craftsman sander which still runs very well. It however  is missing an Allen key set screw. Hope this can be replaced.

I used the sander twice and on the third try the motor failed to get to rpm range and tripped the breaker. Upon removing the bottom cover I could see the capiacitor was smoking and leaking an oily fluid. 13 months old what a piece of junk.

I bought this sander because of it's dual purpose abilities plus it has enough power to get the job done. I mainly use this sander for wood and Ivory and it really does an excellent job, not only that but it saves me time from having to jump from one machine to another.

I received the sander and it was packaged real well except for the sanding disk.  It came with the protective paper pealed back so the adhesive was exposed and dirty.  I used it anyway but have doubts if it will stay on the sander.  The sander was easy to assemble was set up in minutes.  It has plenty of power so I think it will be strong enough for anything I plan on doing with it.

If you're looking for a light duty, compact combo sander, this unit will suite you well. There is some assembly and set up required, but don't worry, in fewer than 20 minutes you'll be up and running. I strongly recommend attaching your shop vac to the integrated dust port of the belt sander. It's there for a reason and when the shop vac's on, it works well to limit dust. I got exactly the performance I expected.