Stay Connected
At a Glance
Specifications
Special Offers
Convenient and long-lasting, this Craftsman Yard Tractor is powered by a 17.5 hp Briggs & Stratton® Silver series engine. This yard tractor is made for large cutting tasks, and with a 42" cutting deck, you can cover larger areas in less time.
| Controls and Features: | |
|---|---|
| Shifter Location: | Fender |
| Steering Type: | Sector and pinion |
| Steering Wheel Type: | Standard |
| Dimensions: | |
| Item Weight (lbs.): | 495.0 lbs. |
| Product Overview: | |
| General Warranty: | 2 year full, 5 year frame & front axle |
| Lawn Tractor Type: | Gear drive |
| Controls and Features: | |
|---|---|
| Shifter Location: | Fender |
| Steering Type: | Sector and pinion |
| Steering Wheel Type: | Standard |
| Dimensions: | |
| Item Weight (lbs.): | 495.0 lbs. |
| Product Overview: | |
| General Warranty: | 2 year full, 5 year frame & front axle |
| Lawn Tractor Type: | Gear drive |
| Transmission Type: | GEAR |
| Color: | |
| Overall Color: | Storm gray |
| Installation Requirements: | |
| Setup Requirements: | Some assembly required |
| Chassis: | |
| Brakes Type: | Disk |
| Frame Type: | Channel |
| Front Axle Material: | Steel |
| Step Thru Frame: | Yes |
| Wheel Grease Zerks: | Yes |
| Handling & Operating: | |
| Turning Radius: | 18 in. |
| Drive System: | |
| Speeds, Forward: | 6 |
| Speeds, Reverse: | 1 |
| Transmission Type: | GEAR |
| Motor-Engine: | |
| Air Filter Type: | Auto-type paper |
| Cooling Fan: | Yes |
| Cylinders No.: | 1 |
| Motor CC: | 502 cc |
| Electronic Ignition: | Yes |
| Engine Brand: | Briggs & Stratton(r) |
| Lubrication System: | Splash |
| Engine Series: | Silver |
| Cylinder Liner: | Cast iron |
| Horsepower: | 17.5 hp |
| Valve Design: | Overhead |
| Wheels & Tires: | |
| Front: | 15 x 6 x 6 in. |
| Rear Tire Size: | 18 x 9.5 x 8 in. |
| Type: | Turf saver |
| Fuel System: | |
| Fuel Capacity: | 1.25 gal. |
| Accessories Accepted: | |
| 2 Bin Bagger: | #24891/#24897 |
| 3 Bin Bagger: | #24892 |
| Hauling Equipment: | Yes |
| Lawn Care Attach: | Yes |
| Mulch Kit Part Number: | #33742 |
| Convenience: | |
| Cup Holder: | Yes |
| Seat, Adjustable: | Yes |
| Cut: | |
| Cutting Blades Number: | 2 |
| Cutting Deck Type: | Vented |
| Cutting Height Adj. Ease: | Tools |
| Cutting Positions: | 6 |
| Deck Cut Width: | 42 in. |
| Deck Thickness (Gauge): | 13 |
| Cutting Range: | 1-1/2 to 4 in. |
Overview
Ratings & Reviews
Guides & Policies
Convenient and long-lasting, this Craftsman Yard Tractor is powered by a 17.5 hp Briggs & Stratton® Silver series engine. This yard tractor is made for large cutting tasks, and with a 42" cutting deck, you can cover larger areas in less time.
California residents: This product does not meet current California emissions regulations. Please, go to our Store Locator to locate a nearby store that will have a similar, compliant product available.
Added on February 25, 2009
Overall Rating
(30 reviews)
26 of 30 (86%) customers would recommend this product to a friend.
1 people thought this was helpful.
I owned a Craftsman lawn tractor for over 15 years. It is still running decently. I was actually looking for a replacement mowing deck, as mine had finally rusted through. Unable to find a used one and seeing that a new complete assembly cost almost $500., I figured I'd go ahead and spend double that and replace my aging tractor as well. When I went looking at Sears, however, I found that they had changed manufacturers for 2010--the old Husqvarnas were replaced by Cub Cadets. I had really had good luck with my old Husky. Luckily, I was able to find a 2009 model on clearance. Remarkably, after all these years, the frame and much of the mechanicals seem similar, if not identical; many changes appear largely cosmetic. I felt right at home looking the tractor over and, later, mowing with it. I do like some of the improvements I have noticed, like the air filter and the oil drain. Unfortunately, a couple of other things seem to have gotten flimsier--we'll see if they hold-up as well and as long as the old ones. A big disappointment is the lack of rubber pads on the footrests--the bare metal will be very slippery (and dangerous) when wet. A catalog picture of this model shows it having the pads. (Another reviewer said he also had this problem and was later given the pads when he showed the service guy his neighbor's identical model--with the pads; I'm going to go after them, too. His tractor was also missing some decals, as is mine.) My old motor always had sufficient power and this new one has a few additional horses. The first time I cranked it over, it kept surging. The fuel may have been old--it had come out of my [Craftsman] snow-blower. When I topped-up with fresh gas, it evened-out nicely. I have no problem with the touchy clutch and the quick take-offs--I have had years to get used to how to avoid them. This new tractor seemed much tighter, smoother, and quieter than my old one. The steering almost feels power-assisted in comparison. I'm glad I was able to get my hands on this tractor before they all disappeared!
0 people thought this was helpful.
Have owned this lawn tractor for just about a year and used it over a dozen times. This is a very basic mower which gets the job done, but will not give you an even cut. I have spent a lot of time adjusting the deck, but just can't seem to get an smooth cut. I suppose I will have to break down and buy the rear guide wheels. When cutting very tall grass, seems to leave a strip in the middle where the grass is not evenly mowed. I highly recommend getting the mulching kit, cause without it, it will throw the clippings a good ten feet. Motor starts up quickly but is loud, so if you have a lot to mow, ear protection is a must. So if your looking for a basic mower, with lots of power, which will give you a decent cut, I recommend this mower.
Click on the Pros and Cons above to filter reviews
See all reviews for this product
Craftsman Club MemberI owned a Craftsman lawn tractor for over 15 years. It is still running decently. I was actually looking for a replacement mowing deck, as mine had finally rusted through. Unable to find a used one and seeing that a new complete assembly cost almost $500., I figured I'd go ahead and spend double that and replace my aging tractor as well. When I went looking at Sears, however, I found that they had changed manufacturers for 2010--the old Husqvarnas were replaced by Cub Cadets. I had really had good luck with my old Husky. Luckily, I was able to find a 2009 model on clearance. Remarkably, after all these years, the frame and much of the mechanicals seem similar, if not identical; many changes appear largely cosmetic. I felt right at home looking the tractor over and, later, mowing with it. I do like some of the improvements I have noticed, like the air filter and the oil drain. Unfortunately, a couple of other things seem to have gotten flimsier--we'll see if they hold-up as well and as long as the old ones. A big disappointment is the lack of rubber pads on the footrests--the bare metal will be very slippery (and dangerous) when wet. A catalog picture of this model shows it having the pads. (Another reviewer said he also had this problem and was later given the pads when he showed the service guy his neighbor's identical model--with the pads; I'm going to go after them, too. His tractor was also missing some decals, as is mine.) My old motor always had sufficient power and this new one has a few additional horses. The first time I cranked it over, it kept surging. The fuel may have been old--it had come out of my [Craftsman] snow-blower. When I topped-up with fresh gas, it evened-out nicely. I have no problem with the touchy clutch and the quick take-offs--I have had years to get used to how to avoid them. This new tractor seemed much tighter, smoother, and quieter than my old one. The steering almost feels power-assisted in comparison. I'm glad I was able to get my hands on this tractor before they all disappeared!
Have owned this lawn tractor for just about a year and used it over a dozen times. This is a very basic mower which gets the job done, but will not give you an even cut. I have spent a lot of time adjusting the deck, but just can't seem to get an smooth cut. I suppose I will have to break down and buy the rear guide wheels. When cutting very tall grass, seems to leave a strip in the middle where the grass is not evenly mowed. I highly recommend getting the mulching kit, cause without it, it will throw the clippings a good ten feet. Motor starts up quickly but is loud, so if you have a lot to mow, ear protection is a must. So if your looking for a basic mower, with lots of power, which will give you a decent cut, I recommend this mower.
I bought this mower around the first of Feb. 2010 so I don't have any grass to mow yet but I have rode around some and mowed leaves. I think it's a good mower. I customized my mower with new paint, decals, a nice racing type steering wheel, an oogah horn, rubber foot mats, and a home made metal roof. I can't wait til the grass grows :). Check the video review out for how it looks. One thing you should do before buying this mower and that is Join the Seaars Craftsman Club and Shop Your Way so you will get a discount.
We purchased this rider to get rid of our push mower we had for our 2 1/2 acre property.. ( yeah we liked exercise back then ) but honestly ive read the reviews.. and have never had any of those issues.. actually i just pull the mower out of garage today and it fired up right away.. wow.. i was impressed.. since it sat thru a very cold and 37 inches of snow a record for our area of town.. so very impressed.. just surfing sears for tuneup items came across this forum figured id toss my 2 cents worth in .. but to the guy with steering coming off.. i did have that happen on my 2nd season on owning mower.. but with anything that vibrates..things come loose.. or maybe im too easy.. but a quick bit of threadlock and tightened and has had no issues since..
You can be sure we'll offer you the best available options every step of the way.
Sears Price Match Plus Policy We find the lowest price, and then we beat it - period! See details.
Satisfaction guaranteed or your money back. Restocking, cancellation or other restrictions may apply. Learn More
If there's ever a problem with your product, a protection agreement can provide you with peace of mind. Find out how.
Not ready to replace? Repair. Sears can help you save money and time. Schedule Now!
A Fulfilled by Sears merchant stores their inventory in our warehouse. Once an item is purchased, Sears packs, ships and provides customer service for the order. These items are also eligible for options like gift wrapping and ShipVantage. Purchasing from a Fulfilled by Sears merchant is as close to buying direct from Sears as you can get letting you shop with confidence.