Craftsman  WeedWacker™ Gas Trimmer 25cc* 2-Cycle Curved Shaft

i bought this yesterday to replace a previous craftsman i had for a little more than 2 years. the old one broke recently so i thought i'd get a part for it but it was too expensive. so i decided to just buy a new one, this one. this one is hard to start. and once it started, it would idle but as soon as you gave it gas, it would die. once warmed up, it should be at position 3 (for the choke valve) but it would not run at that position. it would always die. it would run at position 2, but it had no power and the head would spin with a delay as you give it gas. brand new and out of the box and already it is having problems. this will be returned today.

Just bought this trimmer. It keep turning off every time I turn the choke off. I opened it up and found out the sticker was put on backwards. The number goes the opppsite way it was put on. Hope this helps other people's problems

Hopefully this will help you all out and anyone else who buys this trimmer. I bought one and had it constantly stall out on me only in the off choke setting. I replaced the fuel mixture, cleaned and oiled the air filter and fiddled with the idle screw to no avail. The warranty rep told me to exchange the unit because it was only one week old. The replacement also stalled out in the off choke setting (perhaps even a little worse than the first trimmer did). Something was not clicking so I decided (after a lot of research) to adjust the lo-speed needle (closest of the two special screws towards the engine) on the carburetor (counter clock wise 1/8th of a turn to richen the mixture ? did it without the special Single D carb tool). Doing that plus increasing the idle fixed it. This may help those who have trouble starting it as well (I did not) Since then it?s operated for 45 minutes for two sessions straight with no hesitation or stalling at any rpm. It is a very strong and capable!

I received this trimmer as a gift and was happy to try the new "hassle-free" cutting head and string design because I've been very frustrated in the past with the traditional style line loading designs. However, after the original string wore out in about 10 minutes and I tried to replace the string, I was ready to go back to the old design. It was the worst design that I've ever seen. First of all, you shouldn't need to get out tools to replace the trimmer line. The need for a very small screw driver to push the release pin is simply idiotic. Second, the pin is a small, fragile "plastic" piece that broke the first time I pushed it in. Have the Craftsman designers forgotten words like "robust", "reliable" and "quality"? To make it even worse, the customer service manager wouldn't take it back because I didn't have the receipt (it was a gift.) Has Sears also forgotten what "customer service" means. I'm done with Craftsman and done with Sears.

I got this trimmer for Christmas. I first tried it in the spring. I followed the steps in the instructions. Then pulled and pulled and pulled. Nothing. Waited about an hour and pulled some more. Finally it started. Then died. Pulled some more and it started. Has to be held at full throttle or it will die. It worked like that for a few weeks. Now it won't start at all with the string. I bought the drill attachment. It works about as well as the string. And it's now leaking from the back cover. My neighbor gave me a heavily use Poulian cause my weeds were so thick. I think they sell these at ********. It starts right up, can idle, can run full throttle and most importantly, it works. I'm going to take mine back to Sears, but I doubt they will do anything. This will be my last Craftsman power garden tool.

Looking at prior reviews, the biggest complaint seems to be the starting. I've had it for a month and this one starts reliably as long as you follow the instructions. It is pretty powerful - good for medium-heavy grass. It's also not very heavy, so fairly easy to use. A good blend of power, weight, performance and a good price.

Works well. Great price. I also purchased the edger attachment that converts seamlessly. Not difficult to start. Very pleased with purchase.