Soleus Air 10" High Velocity Wall Mount/Table Fan

A good fan can make the difference between a sleepless and a restful night. Soleus Air's FT2-25-03 10-inch table fan has three speeds and a five-finned blade--five fins move more air than the traditional four--to help make a hot, stuffy room feel much cooler. The fan head is anchored on top and bottom like a globe, allowing it 180 degrees of rotation, and the fan grill can oscillate to push air into a wider area.The FT2-25-03 table fan has a modern look to it, with an asymmetrical, crescent-shaped stand that curves around the circular fan head. It's built of heavy-duty silver plastic and has blue-gray detailing. It sits on two rounded feet; there are wall-mounting screw brackets on the underside of the feet. Speed selection is made with a sliding knob on the side, and there's a simple on-off toggle for the oscillation. The power cord is 5 feet long, which can be especially helpful when using the FT2-25-03 as a wall fan.To use as a wall fan, mount two screws vertically to a wall at a distance of 7-5/6 inches from each other, and use the two wall-mounting screw brackets in the bottom of the feet. Always unplug fan before cleaning; use a soft cloth, dry or only slightly moistened, and towel or allow to air dry afterward. Do not allow water to drip on or enter fan housing. The 115-volt Soleus Air FT2-25-03 table fan measures 14-1/2 by 14-1/2 by 6-1/2 inches, with a 10-inch fan head. Soleus Air offers a 1-year limited warranty against defects in material and workmanship under normal use conditions.--Garland Withers