How to Install (Pls record the fingerprint before installing):
1. Fixed the Part A in proper place with two large silver screws (cabinet side / upper edge, upper edge of drawer)
2. Drill a 15 mm diameter round hole in the proper position on the outside board of the drawer/cabinet and then put the fingerprint panel in the hole. Note: Put the prompt lamp on the up side.
3. At the other end of the board, pass the wire through the metal gasket and use two small yellow screws to fix the gasket and the fingerprint panel. Then connect the line to the lock box correctly.
4. Use two big silver screws to secure the lock box in place (screw length is freely chosen according to board thickness)
5. Here we done! Check whether the distance is appropriate and whether it can lock normally.
Why Choose SUMNEW Lock!!!
0.5s Quick Unlock
View full description
Item# : SPM9166117823
Model # : F040_Fingerprint_Cabinet_Drawe