SUNGATOR 6-Pack 1/2-Inch Push Fit Plumbing Tee, Push-to-Connect Plumbing Fittings, Brass Pipe Connector T Fittings for Copper, PEX, CPVC

CONNECTION STEP 1: Make sure you have a clean and square cut with pipe cutter. TIPS: If you are on copper pipe, we further advise to ream/deburr the inside to reduce the roughness. STEP 2: Use deburr tool shown on the picture to ream the end of the pipe first and mark insertion depth on the pipe then. STEP 3: Fully push both ends into the fitting until the depth line you leave on the pipe covered. When pipe is not fully inserted, it will leave room for leakage. DISCONNECTION STEP 1: Position the disconnect clip next to the end. STEP 2: Press firmly the disconnect clip against the collar of the end and pull the pipe out of the fitting with a twisting action. STEP 3: Complete disconnection. COUPLING ELBOW TEE ANGLE STOP STRAIGHT STOP BALL VALVE SIZE 1/2", 3/4", 1" 1/2", 3/4", 1" 1/2", 3/4", 1" 1/2" X 3/8", 1/2" X 1/4" 1/2" X 3/8" 1/2", 3/4", 1" QUANTITY 2, 6, 12 2, 6, 12 2, 6, 12 2, 6, 12 2, 6, 12 2, 6 AVAILABLE PIPE CONNECTION Joins copper, CPVC, HDPE or PEX pipe Joins copper, CPVC, HDPE or PEX pipe Joins copper, CPVC, HDPE or PEX pipe Joins copper, CPVC, HDPE or PEX pipe Joins copper, CPVC, HDPE or PEX pipe Joins copper, CPVC, HDPE or PEX pipe

View full description