Supreme Suspensions - Toyota Tacoma 3" + 1.5" Complete Leveling Lift Kit 2WD 4WD

Fits 1995-2004 Toyota Tacoma 2WD/4WD (6 LUG)** Will NOT Fit 5-Lug Model. This kit will raise the overall height of your truck and level your vehicle stance. The front lift spacer is not a 1:1 ratio. Meaning that the amount of lift you'll gain is much greater than the actual thickness of the spacer. Our Pro Billet Front Lift Kit just exudes quality and makes other kits seem just average. Every kit is precision CNC machined from rock solid billet T6061 Aerospace aluminum, then sandblasted for added rigidity, and finally anodized. Our rear lift kit includes 1.5" machined billet lift blocks anodized black w/u-bolts. The lift blocks are much easier to install and retains your factory ride quality, unlike Add-a-Leafs, which will really stiffen your suspension. Quality is second to none and absolutely guaranteed. Much higher quality than blocks made from a cast using scrap metal. You can also reuse your factory shocks. This is the most complete kit on the market and has everything you need to completely lift your truck. Comes with front skid plate spacers (3x) and 1" differential drop spacers (2x), brake proportioning bracket, and complete hardware. The differential drop will prevent damage to the CV boot and axle joint by decreasing the amount of axle angle that was increased from the 3" lift. Our kit is one of the only kits that carry a proper Brake Proportioning Valve Relocation Bracket in order to ensure that your lines are not over extended. We designed this kit with do-it-yourself installation in mind. Since the kit is designed to bolt onto the the top of the strut, install can be completed using normal hand tools and a floor jack in about 1-2hrs. No special tools required. Kit Contains: 2x Front Billet Lift Spacers, 3x Front Skid Plate Spacers, 2x Differential Drop Spacers, 1x Brake Proportion valve relocation bracket, 2x Machined Billet Rear Lift Blocks, 4x U-bolts, Installation Instructions.