Bright Image Corporation Outdoor Hard-Wired Post Eye Light Control with Photocell Light Sensor for Outdoor Lighting, Photocell sensor and Touch and Glow

PhotoControl Button, PhotoElectric Unit, Light Responsive switch, Automatic Dust Till Dawn Lightning Fixture Solution, PECU EZ-346A. Ideal Replacement PhotoControl For Pole Lanterns, Mercury Vapor Lights, Twin Floodlights, Entry Lights, Area Lights, Walkway And Parking Lights, Ideal for outdoor post lamps, driveway lights or security lampsOn at dusk and off at dawn automatic scheduleCan also be used to control indoor lightsHelps contain energy costs once installedFits into a standard outlet box, post lamp or wall packLighting Type: Use With Single Or Multiple Outdoor Lights Applications Installation Instructions: Read All Instructions Completely Before Beginning Installation. ★Use With Weatherproof Wall Plate Having 11/16 Diameter Mounting Hole ★ Use only U. L. Listed wire connectors (not included). All metal strands of wires MUST be completely inside wire connectors. Wrap electrical tape in multiple layers to further secure the connections. ★Connect the red wire from the Photo Control to the black wire of the light fixture. ★ Connect the black wire from the Photo Control to the black (hot power supply) wire. ★ Connect all of the white wires (neutral) together. ★ The body of control must be located inside weatherproof electrical enclosure. Insert the nipple through the face plate hole and screw the nut on enclosed gasket tight enough to make a weatherproof seal. If the surface is uneven, apply RTV silicone rubber sealing compound before installing photocontrol. ★ Turn on power. Photo Eye has up to 2-minutes delay when turning the power On/Off. Troubleshooting Guide: 1. If lamp cycles during day, check that black and red wires are not reversed. 2. If lamp cycles during night then somehow reflected light is falling on photo-eye. Use black electrical tape to partially obstruct the sensor to limit reflected light from entering photoc

View full description