Hexagonal connector Smart Mechanism with solid Ratchet
Hexagonal fitting of jack: S=17mm
Ratchet wrench: S=17mm; L=338mm.
Hexagonal joints are suitable for many tools. It can be operated by not only manual ratchet spanner but also electric wrench.
The handle receiver adopts the mature technology of hot forging
Lightly press the button to switch on and off the jack quickly.
With this scissor jack you can easily and safely lift your vehicle to the desired height.
360 Degree alignment Rotation Head
Head / Saddle dimensions: length : 5cm /1.97inch ; width : 3.8cm / 1.5inch.
Its a pretty good size for SUVs and smaller cars. such as: sedan, coupe, MPV, hatchback, crossover, wagon and more.Its low enough at 4 inches to get under smaller cars and high enough at 17 inches to pick up SUVs without the need to use other jacks and jack points at the same time.
Thickened and Wider Stable Bow-tie Base
Autoins updated thickener base provides stability and strength in case of dumping..
Occasionally lubricated the spindle to make lifting more easier.
Make sure that the saddle is correctly positioned.
How to use ?
STEPS:
A.Before lifting, stop the vehicle on the level and hard road (the maximum slope shall not be greater than 6°)
B.Put the manual gear into the first gear or reverse gear, and put the automatic gear into the "P" gear, and pull on the parking brake of the hand brake.
C.Block the wheel which is on the diagonal of the broken tire with a big stone.
D.Loosen the wheel nuts, but do not unscrew.
E.Place the jack under the jacking position specified by the automobile factory, and use the ratcheting handle to lift your car to a proper height.
F.Pull off the wheel nuts and replace the broken tire.
G.Pull on all the fixing nuts of the new wheel by hand. Lower the jack until the tire is on the ground. Then take out the jack and use the wheel wrench to tighten all the wheel nuts.
SAFETY GUIDELINES
Â&
View full description
Item# : SPM9275808029
Model # : DI9-EKL02
