BISupply Electric Rope Cutter Blade Hot 30W Electric Hot Knife Cutter Mount Cutter – Heat Cutter Heat Knife Hot Cutter

Features :

• CUT & SEAL: The BISupply Heated Knife is a thermal knife that can be used as a ribbon cutter, hot knife fabric cutter, webbing cutter, hot knife plastic cutter, or hot knife rope cutter; Cut materials with a width up to 2 inches (5.1cm); This hot rope cutter also seals rope as it cuts to prevent a mushroom effect and fraying; Quickly heats to continuous high temperature; Rapid heating time means that you do not need to leave it on (it can be reheated for every new cut to prevent injury and burn)
• USE ANYWHERE: Use as a bench mount hot knife for maximum safety and security; 4 pre-drilled holes in base for permanent mounting in your garage, craft room, workshop; Depending on application, operate in a well-ventilated area to avoid inhaling fumes; 4.75” x 4.2” x 3.1” inch (12.1cm x 10.7cm x 7.9cm) base, 2.1-inch (5.3cm) wide blade surface for finishing touches and melt fibers; 3-prong 42-inch (106.7cm) power cord; Includes brush with 5-inch (12.7cm) handle
• EASY TO USE: Unscrew the knife holder with the included T-bar hex key, place the 2 blade legs in the knife holder, tighten screws, and make sure that the blade and knife holder have full contact, then connect to an appropriate power connection; To use, turn the power switch to the “on” position, place your material to be cut on the blade, and turn the power switch to “off” after cutting; Wait for the blade to cool before handling
• BUILT TO LAST: AC 120V, 60Hz, 30W power; 932-degrees Fahrenheit (500°C) temperature of blade; Conforms to UL STD.499 and is certified; Cuts quickly and cleanly (we recommend not leaving the hot cutting knife on for extended periods of time to avoid the blade from warping and making distorted cuts)
• PACKAGE CONTENTS: Package includes (1) fabric hot knife, (1) hot blade, (1) T-handle hex key, and (1) cleanin

View full description