• 3 answers
    • 0 posts
    • 0 comments
    • 0 reviews
  1. Liked this: Home & Family Which tools should be in everyone's toolbox?

    hammer, pliers and a length of bailing wire
  2. Liked this: Home & Family Which tools should be in everyone's toolbox?

    In my opinion, a hammer, a phillips and flat screwdrivers, and pair of general purpose pliers
  3. Liked this: Home & Family Which tools should be in everyone's toolbox?

    Vice grips,hammer,screwdriver set, wrench,needle nose pliers,wire cutters,and assorted socket tool kit!
  4. Liked this: Home & Family Which tools should be in everyone's toolbox?

    adjustable vice grips,hammer,screwdriver set,hexsaw,cressen wrench,slip jaw pliers,needle nose pliers,wire cutters,and a nice assorted socket tool kit with ratchet drives!
  5. Liked this: Home & Family Which tools should be in everyone's toolbox?

    Craftsman!!
  6. Liked this: Home & Family Which tools should be in everyone's toolbox?

    A 12 inch long blade, Combination square, preferably with a hardened metal head. This tool includes a 12 inch long, detachable rule/ straight edge. Combined with the sliding head the rule can ch…
  7. Liked this: Home & Family Which tools should be in everyone's toolbox?

    I like to keep a socket set, pliers, standard and phillips in my toolbox. And electrical tape for sure.
  8. Liked this: Home & Family Which tools should be in everyone's toolbox?

    Ductape
  9. Liked this: Home & Family Which tools should be in everyone's toolbox?

    If you are going to be striking a metal object with a hammer, you should use a hammer designed to strike other metal objects, like a relatively common ball-pein hammer. It comes in different head w…
  10. Liked this: Home & Family Which tools should be in everyone's toolbox?

    I you... own a ratchet(s), you should have a Break-Loose-Bar (flex handle) for each drive size of ratchet you own. The ratchet will last much longer and less knuckles will get "busted" by trying to…
  11. Liked this: Home & Family Which tools should be in everyone's toolbox?

    In addition to the basics: hammer, adjustable wrench, manual phillips and flat screw drivers, small socket set, fasteners,duct and elictrical tape,razor blade scraper, box cutter, and zip ties. I like…
  12. Liked this: Home & Family Which tools should be in everyone's toolbox?

    In my opinion I think that everyone should have screwdrivers, hammers, wrenches, nails/screws because I find that these are the most used tools throughout every project
  13. Liked this: Home & Family Which tools should be in everyone's toolbox?

    Hello mmorr54, I would like to answer your question. This is a very subjective question, however for a good all around home toolbox, I suggest starting with the essentials like a pair of pliers, a…