Question

I have an Kenmore 1392 dishwasher. I opened it during the drying cycle, and now it appears to be frozen up. It won’t do a thing.

The Start/Resume lights blink continually, and there is occasional beeping. Pushing the Start/Resume button doesn’t help. Pushing the Cancel button doesn’t help.

Answers

2 answers

  1. Thank you for your question. When the Start/Resume lights are blinking it is usually because the control thinks the door is open. I suspect you have a problem with the door switches. Be sure the door is being shut completely. The door switches can be checked with a meter if one is available. YOu have display lights to the thermal fuse is likely okay. The Start/Resume keypad may be the problme but the door switch is more likely the cause of this problem.

  2. Hi Richard,

    Thank you for posting your question in the MySears Community!

    To help you further with this issue, one of our Sears Appliance Experts have been notified.

    Please check back periodically for a reply back with some trouble shooting tips that might help with fixing this issue.

    Thank you!