Coolneon Will Make Your Life Cool Like Neon!
How Lichtenberg Wood Burn
Product details description
Lichtenberg wood burning, also known as creating Lichtenberg figures is the art of burning tree like or lightning like pattern into wood using high voltage electricity, which is generated by a transformer, usually a neon sign transformer (NST) or a microwave oven transformer (MOT) or an oil burner transformer (OBT).The types of wood and grain patterns affect the shape of the Lichtenberg figure produced. Fractal wood burner burning is a process of applying an electrically conductive solution on wood through a transformer using two probes or two car battery alligator clips.
Neon Sign Transformers for Lichtenberg wood burning machine are usually between 9000 and 15000 volts, but the most common ones are around 10000 volts. The neon power supply has much lower amperage than the MOT, usually around 30mA.The Lichtenberg figure created by neon sign transformer shows more details and is more interesting, but burns slowly, shallowly and narrowly compared to MOT. Our neon sign transformer can be used to replace the old neon sign transformer, for new neon light sign (not led), also for making Jacob’s ladder climbing arc.
SGFP(Secondary Ground Fault Protection) built-in can shut off power if a short circuit or similar conditions occur. If the SGFP is activated, Please Unplug NST, Plug NST, Press rocker switch, Pull pull-chain switch (if applicable)until it can work.
What are in the box?
1 Neon Sign Transformer, Model: BNP-308II, Input: 120VAC±10%, 0.9A Max. 50/60Hz, 3-Prong US Plug, 2m Cable, 18AWG, 105℃. Output: 10kVAC, 30mA, 25kHz 0.5m Cable, GTO-15, 18AWG, 105℃. Switch: Rocker switch, NW: 2.4LBS, DIM: 6.73 x 3.7 x 1.8IN.
Copper Rods: 2 PCS, Dia.: 5mm, Length: 150mm.
Clamps: 2 PCS, Red+Black, 4 terminals for AWG16-18(2 pcs terminals are for backup), 2 screws with nuts.
Electrical Insulated Gloves: 1 Pair Gl
View full description
Item# : SPM9269173329
Model # : iSH09-M620081mn
