DCT Bench Holdfast
From small boards to large blocks, this DCT Bench Holdfast makes frequent clamping simple. It is an 8-inch clamp with a 4-inch reach and 5/8-inch shaft diameter to use with any bench thickness from 2.5 inches and up.
UNIQUELY HOOKED PROFILE
It can be used in applications where you need to consistently shift your workpiece such as in carving, routing, sanding, finishing, and general woodworking jobs. The rough stem and uniquely hooked profile offer a strong hold on difficult workpieces.
EASY TO USE
To use, drill a vertical 3/4-inch hole in your workbench top and drop the holdfast in place. When the arm contacts the top of your stock, give the holdfast head a firm tap until it jams tightly in the hole. To disengage your work from the clamp, tap the backside of the vertical shaft to unjam from the hole and release your work.
THE PERFECT SIZE
8-inch (20.3cm) clamp has a 4-inch (10.2cm) reach and 5/8-inch (17mm) shaft diameter to use with any bench thickness from 2.5 inches (6.4cm) and up
View full description
Item# : SPM9269661229
Model # : 6785