You need a safe and convenient method to replace plugs or build a new extension cord. The Dumble RV Supplies Male 50amp RV Plug is your solution. With this 4 prong generator plug 50 AMP adapter in hand, remove original cord end, strip outer jacket end by 3.9-inch (100mm), cut black and red wire to protrude 2.2 inches (55mm) from the jacket, cut the white wire to protrude 1.4 inches (35mm) from the jacket, strip 0.5 inches (12mm) of all colored conductor cables. Loosen 3 holding screws from face of plug and remove cover. Loosen 2 strain relief screws enough to accept the cord and jacket. Slide cord through until edge of stripped cable is protruding through strain relief clip opening. Tighten strain relief, replace handle (make sure it is on the back side of the tang), and replace the cover. Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
View full description
Item# : SPM9278723129
Model # : 8358