Installation Steps
Step 1
Clean the floor to avoid too much dust causing the seal to fail to adhere.And rough up the area between the marks with awire brush for best adhesion.
Step 2
With the pencil, mark the inside and outside edge of the threshold on the floor and the full length of it (from one door jamb to the other).
Step 3
Apply three rows of adhesive the length of the door between the pencil lines as shown (The seal kit does not include glue).
Step 4
Replace the threshold between the pencil lines and firmly press it into place. Carefully apply pressure to the threshold to ensure the adhesive spreads uniformly.
The results of the experiment were issued by Shenzhen HuaceTesting and Certification Center on June 27, 202.
The results of the experiment were issued by Shenzhen HuaceTesting and Certification Center on June 27, 202.
View full description
Item# : SPM9284088629
Model # : iSH09-M444279mn