How to Install: Step 1 - Place mesh flat on the ground with velcro facing up. 2. To align magnets, pull them apart slightly and let them close again. 3. Without removing the white backing tape, stick the supplied velcro strips to the mesh. (a) Long Velcro piece across the top. b) Short velcro pieces down each side. 4. With an assistant pick up the mesh from the top and hold it up to the door frame. Check the alignment with the door frame, the bottom should just touch the ground. Make sure it's not too tight across the middle so the magnets close easily. 5. Carefully remove the backing tape from the top and stick to the door frame. 6. Remove the backing tape from the side one at a time, and stick to the frame. 7. Test the mesh opens and closes correctly and make adjustments if necessary. 8. Optionally, for a high traffic door, you may consider using the provided push pins
View full description
Item# : SPM9167187323
Model # : 3999