Programming:
1. Close all doors then open drivers door press unlock button on drivers door while door is open . Insert key into ignition. Keep foot off brake pedal.
2. Turn ignition from Off to Run 8 times ending in Run ( Do not start the car, run position is just before the vehicle will start Off is turned all the way back when the key can be removed from the ignition ). Must be performed within 10 seconds. Locks will cycle signaling entering into programming mode.
3. Press any button on the remote being programmed, locks cycle confirming programming. Repeat this step for any addition remotes.
4. Turn key to off, locks will cycle to end programming mode.
This remote will work as a replacement for the following part numbers:
CWTWB1U345, CWTWB1U331, GQ43VT11T, CWTWB1U212, 8L3T-15K601-AB, 2L3T-15K601-AB,F87B-15K601-AB, 8L3Z-15K601-AA, 164-R8007, OUCD6000022, 164-R8070.
Compatibility
For 2009-2016 Flex
For 2008-2009 Taurus X
For 2007-2015 Edge
For 2006-2012 Fusion
For 2006-2008 Mark LT
For 2005-2011 Mariner
For 2005-2007 Freestyle
For 2004-2007 Freestar
For 2003-2013 E-Series E150 E250 E350
For 2001-2010 Explorer Sport Trac
For 2001-2013 Escape
For 2001-2011 Tribute
For 2000-2005 Excursion
For 2000-2002 Cougar
For 1999-2003 Escort
For 1998-2016 F-Series F150 F250 F350
For 1998-2011 Expedition
For 1998-2015 Explorerv
For 1998-2011 Ranger
For 1998-2003 Windstar
For 1998-2002 Navigator
For 1999-2009 B-Series Pickup
For 1998-2010 Mountaineer
please be sure to check the vehicle fitment guide.
Your vehicle must already be equipped with keyless entry for the remote to work.
View full description
Item# : SPM9278251429
Model # : CWTWB1U331