Hollow wall anchors are designed to create strong, reliable connections without wall studs, allowing you to hang mirrors, artwork and other medium-weight items with confidence and security.
Features of hollow wall anchor set
High quality nails
Made of high quality galvanized carbon steel, rust and corrosion resistant, providing strong load-bearing capacity and safety.
Lightweight tool
Made of thickened reinforced carbon steel, with high quality non-slip rubber cover and return spring setting, the overall set-up is compact, making it light and effortless to use.
Double layer storage box
Upper and lower compartments for storing nails and tools at the same time.
How to use molly bolts for drywall?
Choose the right anchor according to the diameter of the hole ( below size table FYI).
Rotate the anchor so that the anchor cap is spaced 5mm apart from the fixed part
Place the anchor cap in the U-shaped mouth of the wall anchor tool and snap it in place, clamp the nail with slight force.
Insert it into the hole.
Lightly make force until the resistance is greatly enhanced, remove the anchor gun downward to finish.
Size reference table
Warm tips:
1. Please select the appropriate nail for the target hole according to the above table.
2. If the nail is not firm enough, please twist the threadedrod clockwise for a distance, and then use the drywall anchor setting tool again to tighten the nail, you can repeat until the nail is firm.
(Under the pulling force of the drywall anchor setting tool, the nail holds the umbrella to stabilize on the board, the pulling distance of the tool is fixed, when the nail reaches the longer pulling saw needed to clamp the stable situation, you need to twist the threadedrod back clockwise, and then use the tool to pull the nail tight again to hold the fixed umbrella.）
Packag
View full description
Item# : SPM9268518129
Model # : iSH09-M634691mn
