Generic OPENROAD 880 LBS Lift Electric Hoist Crane Remote Control Power System with Emergency Stop Switch Electric Winch Zinc-Plated St

In the Box 1x 880lbs Electric Winch 1x Yellow Sling 1x Yellow Strap 1x Snatch Hook 4x Hexagon head screws 4x Washers 4x Spring lock washers OPENROAD 880lbs Electric Hoist Electrical Rating:110V~120V~/ 60Hz / 4.1A; Rated Capacity:880 Lb. Double Line/440 Lb. Single Line; Lifting Height:19' Double Line/39' Single Line; Lifting Speed:13 FPM Double Line/26 FPM Single Line OPENROAD Electric Hoist Informatiopn The load hoisting motor: This motor is a magnetic single-phase capacitor motor and is isdated in accordance with Class B. The magnetic mechanism is constructed as a break and serves as a reliable safety. The Gear Box: Here the dual-stage gear is used. The cogwheel and the shaft are made out of a high quality, heat-treated, hard and tempered steel. The motor and the gear box are integrated as a sing e unit. The housing is produced through an aluminum die-casting and it is compact and nice. The hoisting drum and framework: The hoisting drum is punched together with a high quality steel, formed, and weldea with steel piping. It is then mounted on the output shaft and the steel rope is then winded up around the object. The hook: the hook is forged from high quality carbon steel. With the pulley hook, the lifted weight is doubled. The remote control must be easily accessible at all times and must therefore be installed at a distance to the floor of between 0.8 m and 1.5 m Insert the load hook into the hook bracket of the mounting casing when using the additional load hook with deviating shaft. Operation with double cable Loosen the nuts cf the 3 screws localed on the additional toad hook and remove the cover plate located on the side. Place the steel cable around the deviating shaft and reattach the cover plate and nuts. Please be sure that the lead hook .deviating shaft is installed properly and that the nuts are securely tighlened. Please insed the load hook attached to the cable into the hook bracket of the mounting casing. Limit Configuration

View full description