Material: Nylon engineering plastic
Clamp Range: 0.9"-1"/24.3-26.1mm
1.Use wire cutters to clamp the outer teeth of the head (the left and right teeth cannot be clamped together). Then move gently along the tooth-shaped slot, finally twist it quickly at a small angle (the rack is dislocated up and down). it will be loosened.
2.If the angle is too large to ensure, the tooth tip will not be deformed. Due to misalignment (the teeth tip will not be deformed when it is clamped).
3.The product can be reused many times.
4.The tighter the card, the harder it is to remove!
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
3.Small accessories are included, please keep away from children.
1. We are committed to providing customers with the best service, If you are not satisfied about ours product you can have 30-day money-back guarantee.
2. If you have any questions about the product, please contact us, we will provide you with a satisfactory solution as soon as possible.
3. As long as you have questions, we provide 24-hour service to solve your problem.
View full description
Item# : SPM9277781329
Model # : SDD22011406