Aqua Coat, Best Wood Grain Filler. Clear Gel, Water Based, Low odor, Fast Drying, Non Toxic, Environmentally Friendly (Pint)

Water based, non-flammable, non-combustible, low odor, low VOC, easy to apply and clean up Aqua Coat's water based clear wood grain filler helps achieve a clear, glass smooth finish on hard to fill woods. It is easy to apply, dries fast, sands easily and is water clean up. It can be tinted with water soluble trans tints and dyes to accent the grains and pores to help attain your desired look. Unlimited possibilities for hobbyists, crafters, DIYers and makers. FEATURES AND BENEFITS Easy to apply gel Fast drying times (30-45 minutes) Easy sanding Color can be added to turn into a gel stain or glaze Water based Safe handling (non-flammable, non-combustible) Non-yellowing Extreme clarity Low odor, water clean up Ideal Uses For Clear Wood Grain Filler Wooden instruments such as guitar, ukulele, piano Cabinet Furniture Antique restoration Table, bar and desk tops Keepsake boxes Gun stocks DIY woodworking DIRECTIONS FOR USE: Aqua Coat Clear Wood Grain Filler should be applied after the piece is stained, and/or a seal coat has been applied. Stain and seal coat must be dry and lightly sanded with 220-grit or finer sandpaper. Work the grain filler generously into open wood grain and pores against the grain with a small squeegee, bondo blade, old credit card, or fingers with a glove. Filler may be applied with a soft cloth using a circular motion. Scrap off excess with a squeegee, bondo blade, or an old credit card with the grain. Let dry 45-60 minutes. Very lightly sand with a 320 or higher grit sandpaper or a fine scotchbrite sanding pad immediately before your next application of grain filler and your first coat of topcoat. The only reason you are sanding is for adhesion purposes. 2-3 coats are recommended.

View full description