Measurement method
Installation steps
1) Clean the original window frame and let it dry.
Tear off the adhesive film of the magnetic strip and stick it flat around the window frame.
Cut off the excessive magnetic strip.
2) Attach the remaining magnetic strip to the magnetic strip glued around the window frame.
(If the magnetic strip does not fit perfectly, You need to change the direction of the outer magnetic strip.)
3) Tear off the adhesive film of the outer magnetic strip. Stick the plastic film on the adhesive tape around the magnetic strip evenly. Insert the plastic strip into the corner.
4) Tear off the adhesive film of the plastic strip, Align and stick on the magnetic strip to clamp the plastic film. Insert the corner when glued to the corner, and insert the other side of the plastic strip at the same.
(Note that the magnetic strip should be pressed into the corner slot at the corner to avoid the corner from popping out. Install the rest in turn.)
5) Cut off the excessive plastic film.
6) Use clips to clamp the outer frame of the screen window, Tear off the adhesive film from the clip, Attach to the magnetic strip of the window frame about 30cm from the top,
Then press the clips and the surrounding frame, and finish.
View full description
Item# : A098752596
Model # :
