Add extra remote control (remote control learning):
Remove the upper cover of the main engine; press the learning button S1 on the control board, an indicator LEARN light will go on; press the same button on the remote control twice, the LEARN light will flash repeatedly and then goes out; remote control learning as succeed. A maximum of 25 remote controls can be learned.
Delete remote control:
To delete remote control that have been learned; press the learning button S1 two sec. and the LEARN light will be on; then hold the button until the light goes off. This indicates that all remote controls have been learned previously have been deleted.
The fourth button on the remote control is for pedestrian mode, press the button the door will open about 1 meter when the door is closed, for pedestrian only.
Note:
- Appliance: Available at the Sliding Gate Opener of G.T.Master Store. If you want to use it on other gate opener, please confirm with us before purchase.
- Portable: Can be buckled on the keychain, easy to carry.
Feature:
- Single Button Mode: The three buttons have the same function, one same button on the remote control to circularly control the main engine OPEN/STOP/CLOSE/STOP.
- Pedestrian Mode: The fourth button on the remote control is for pedestrian mode, press the button the door will open about 1 meter when the door is closed, for pedestrian only.
- Simple to Program: Simply activate the proper learn mode. Supports up to 25 existing remotes via quick, easy programming (Including batteries).
Weight: 0.09lb
Package Size: 2.76*1.85*0.79 inches
Battery: Use CR2032 Lithium Manganese Dioxide button cell (CR2032 3V)
Infrared Sensor Chain Wireless Keypad Warning Light Warning Light Wireless Keypad
View full description
Item# : SPM9166409323
Model # : iSH09-M653754mn
