? Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width 600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door. | ?Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc. | ?Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc. | ? Pressure:150N / 33lb / 15KG (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8". Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door. | ? 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming.
View full description
Item# : SPM18332914604
Model # : RNAB07QNQKVG6
