Information
Dies can process external threads, and be divided into a cutting part, a positioning part and a chip hole. Dies have round dies, square dies, hex dies according to the shape. They are also called as ordinary thread dies, pipe thread dies and tapered pipe thread dies according to the purpose.
Use chip fluid (oil) to obtain quality threads, and it is also suitable for thread maintenance. Suitable lubricating oil is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
Applications
Round threading dies are suitable for general purpose threading.
Can process, correct or clean the external threads. Good for maintenance and repair work.
Lubricating Oil
Lubricant should be applied to the cutting edge. It can help to extend the service life of tools in tapping operations.
Suitable lubricating oil is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole.
Notice
Check the specification and outer diameter of the die and the clamping range of the die wrench to ensure that the two match. Choose a suitable screwdriver to unscrew the fixing screws on the main body of the die wrench.
Put the die into the clamping body of the die wrench, and turn the die slightly to make the side hole of the die consistent with the position of the wrench fixing screw.
Tighten the screws with a suitable screwdriver, so that the die and the wrench can be closely combined. When operating the tapping tool into a semicircle, it must be retracted to ensure that the chips are discharged in time.
View full description
Item# : SPM9282017929
Model # : A21061800ux0691