Heavy Duty Abrasive Media Sand Pressure Blaster Model 110

Built for the professional body shop, with a strong welded hopper, 2 heavy-duty nozzles, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient for everyday use. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pro pressure blaster completely strips the average frame in less than a day, rather than weeks using other units or methods. 22"x12"x32" tall overall dimensions. 2-year limited warranty.

Designed for high flow with minimal air input; a compressor producing a minimum of 10 cfm at 90 psi is required to use this abrasive blaster.

• 110-lb. Capacity Professional Abrasive Blaster
• Two 1/8" Nozzles (each needs 15 cfm at 80 psi)
• 3/32" Nozzle (needs 7 cfm at 80 psi)
• 10' long, 1/2" I.D. Abrasive Hose with automatic shut-off deadman valve
• 3 Seal Blocks
• Pressure Gauge
• Blast Hood
• Instructions

Application

This Pressure Blaster is ideal for cleaning larger parts that do not easily fit into a blast cabinet. The 90-psi pressure behind the abrasive, combined with the siphoning action at the bottom of the tank, delivers an aggressive blast that quickly removes paint and rust. Pressure blasters are many times faster to use than siphon blasters. To minimize the likelihood of distorting sheet metal, reduce pressure to 80 psi, increase gun distance at 45 degrees to the surface. Be sure to wear all appropriate safety equipment.

Safety

WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye and body protection must be worn during use. Inhalation of silica particles can cause cancer and other deadly diseases. Wear NIOSH-approved respiratory protection during operation.