Rust Encapsulator Platinum is a high-performance, moisture-cured coating that encapsulates and stops rust from spreading.Can be used as a top coat or can be top coated with almost any paint. It can be applied over bare metal or surface rusted areas. Brush or spray applied with conventional spray equipment. Rust Encapsulator Platinum is ideal for any type of rusted metal surface and can withstand temperatures up to 350 degrees Fahrenheit.
Beat ALL competitive products in head-to-head Independent lab testing
Passed over 1,500 hours of salt spray testing
Tenacious bond permanently fuses to both bare, clean steel and corrosion
Can be applied directly over surface rust
Heat resistant to 350 degrees Fahrenheit
Simple prep – wire brush, degrease and apply
Easy to apply – brush, roll or spray (spray for best results)
Can be top-coated with any high quality paint system
3X the corrosion protection of our Original Rust Encapsulator
UV Resistant aluminum pigmented finish
Product Application
1. Prepare substrate by wire brush cleaning loose corrosion.
2. Solvent wipe with PRE or Acetone to remove oil, grease or other contaminants. Allow to dry thoroughly before coating.
3. Apply product when surface temp is between 40° Fahrenheit and 80° Fahrenheit with humidity from 10 to 75%. NOTE: assure moisture is not accumulating on the surface to be coated.
4. Apply 1 medium wet coat with bristle brush or roller assuring all cavities and areas of corrosion are covered. NOTE: Product can also be thinned up to 20% with Xylene and spray applied with traditional HVLP gravity or siphon spray equipment, use a 1.4 minimum needle/nozzle
5. Product will be tack-free after 2 hrs.
6. If top coating: apply top coat after 4 hrs., or before 48 hrs. NOTE: If a smoother surface finish is desired, product can be mechanically sanded with 320 grit before top coating.
7. If top coating is desired after 48 hrs., surface must be scuff sanded w
View full description
Item# : SPM9283258929
Model # : 16258ZP
