FLUENTPOWER 1HP Sump Pump 4000GPH Stainless Steel Submersible Pump, Drain Clean/Dirty Water for Basement Flood Cellar Pool Pond Garden Hot

Minimum Water Level for Auto Start Minimum Water Level for Float Switch Automatically Starts from 20". If the water level is not enough, you need to hang up the float to the side buckle and make it manually controlled. Just be careful to dry running with this mode. Min Residual Water Level Pump water down to 2" by Manual Mode, and 6" by Auto Mode. If the water level is not enough, you can choose manual control. Just be careful to dry running with this mode. Float Switch Automatic Operating The pump is Controlled by float switch, which turns ON/OFF according to the water level. Raise the float switch carefully and check if the pump switches on then lower it again to check if the pump switch off before pumping water. Solid Passage The pump is designed also to work with dirty water. Its Maximum solid passage is 1.4". So it will be suitable for mostly water conditions for your daily domestic application. Small sand, some muddy water, or particle all can pass through the pump. Don't use the pump for any salt water, chemical or acid liquid, it may reduce the lifetime of pump. Space Size needed It's better to have a sump or tank size 16" x 16", so that the float switch can be freely float in the water. The distance between the float switch and the pump should not be too small since the switch should be able to move freely. Also make sure that the float switch does not touch the floor. Strong Performance The maximum output with 1.5" discharge port is 4000 GPH. We always suggest to use biggest discharge port and larger hose in order to have optimum performance！ Transferring water from rain barrel for garden irrigation. Draining water from garden ponds. Pumping water from Hot Tub or Swimming Pool. &

View full description