What makes the Omigo Element+ so awesome?
dual temperature washes
temperature control dial
retracted dual nozzles
rear and front wash
self-cleaning system
quick and easy install
no power needed
eco-conscious, budget-friendly alternative to wasteful TP
works with your existing toilet seat
Better Hygiene. Happier You.
Instantly turn your toilet into a modern bidet, because washing is so much cleaner than wiping.
Our Story
Like many Americans, we hadn’t thought too much about bidets or better bathroom hygiene, that is until we came face-to-face with a hi-tech Japanese toilet.
It only took a few washes to realize the error of our ways and inspire us to create the best bidet seats and attachments.
Will this fit my toilet?
Element+ is designed to fit most U.S. toilets, both round and elongated including most one-piece and curved toilet fixtures.
To be sure, measure the distance between the bolt holes. The space must be between 5¼ inches and 8 inches.
Then measure the distance from the center of the bolt holes to the toilet tank to ensure proper clearance. There must be at least ¾ inch of clearance.
If you meet those measurement requirements then you're good to go!
Installation So Easy, a Caveman Could Do It
Prep your toilet:
- remove the seat and clean the bowl
- shut off the water valve and flush the toilet
- detach the metal hose from toilet tank fill valve
Connect the fresh water supply:
- twist on the metal t-valve
- attach the metal hose to the bottom of the t-valve
- attach the bidet hose to the middle of the t-valve
Pro tip: use a bit of Teflon tape to create a watertight seal, and hand-tighten to avoid stripping the connection threads.
Install your Element:&#
View full description
Item# : SPM9284633129
Model # : iSH09-M438042mn